Hinterlass eine Nachricht
Wir rufen Sie bald zurück!
Ihre Nachricht muss zwischen 20 und 3.000 Zeichen enthalten!
Bitte überprüfen Sie Ihre E-Mail!
Mehr Informationen ermöglichen eine bessere Kommunikation.
Erfolgreich eingereicht!
Wir rufen Sie bald zurück!
Hinterlass eine Nachricht
Wir rufen Sie bald zurück!
Ihre Nachricht muss zwischen 20 und 3.000 Zeichen enthalten!
Bitte überprüfen Sie Ihre E-Mail!
Herkunftsort: | CHINA |
---|---|
Markenname: | GESTER |
Zertifizierung: | CE, ISO |
Modellnummer: | GT-M82 |
Min Bestellmenge: | 1 Satz |
Verpackung Informationen: | Hölzernes Verpacken |
Lieferzeit: | 10-30 Tage |
Zahlungsbedingungen: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Versorgungsmaterial-Fähigkeit: | 200 Satz/Monat |
Verwendung: | Testgerät der Spielwaren | Garantie: | 1-jährig |
---|---|---|---|
Produktname: | Spielwaren-Roller-Lukas | Anwendung: | Spielwaren und Spielzeugmaterialien |
Stromversorgung: | 220V 50Hz | Technologie: | Berufs |
Gester: | SGS revidierte Lieferanten, TUV | ||
Markieren: | Spielwaren-Testgerät en 71-1,170kg spielt Testgerät,Roller-Steuerungsrohr-Lukas en 71-1 |
Application: Toys Scooter Steering Tubes Strength Tester apply to test the strength of toy scooter steering tubes,including resistance to downward forces and resistance to upward forces. Standards: EN 71-1; ISO 8124-1 |
1.Resistance to downward forces
Place the toy scooter on a horizontal plane and secure it so that it will stand upright during the test.Check that the locking devices are correctly engaged.
A) For toy scooters with two handles, suspend a mass of (50+/-0.5)kg at the centre of each handle. (see Figure 1 a) Maintain the load for 5 min. Determine whether the steering tube collapses and the locking devices are still operable and engaged. Remove the 50kg masses. Release the main locking devices and with the secondary locking device still engaged, load the handles with a mass of (25+/-0.2)kg each and maintain the load for 5 min. Determine whether the secondary locking device is still operable and engaged.
B) For toy scooters with steering tubes without handles, perform the test using a load with a mass of (100+/-1)kg and (50+/-0.5)kg respectively on top of the tube.(see Figure 1 b)
2.Resistance to upward forces
Place and secure the toy scooter upside down on a podium(see Figure 3 c). Check that the locking devices are correctly engaged.
A)For toy scooters with two handles, suspend a mass of (25+/-0.2)kg at the centre of each handle. Maintain the load for 5 min.
B) For toy scooters with steering tubes without handles ,place a mass of (50+/-0.5)kg on the end of the steering tube. Maintain the load for 5 min. Determine whether the steering tube has separated and the locking devices are still operable and engaged.
Model |
GT-M82 |
Loading method |
Cylinder loading |
Control mode |
Touching screen control |
Test load |
(25±0.2)kg (50±0.5)kg (100±1)kg |
Dimension |
1200×1000×1700mm |
Weight |
170kg |
Standards |
ISO 8124-1 section 5.29 |
Optional accessories |
GT-MA12 Air compressor |